WALLS & FLOORS
FLOORS
The range of tiles offered in the market today are endless and will only continue to increase. Tile options range from ceramic, vitrified, glass mosaics, natural stones like marble and granite. The options in terms of sizes are also increasing and larger format tiles are also becoming popular.
The present penetration of tile adhesives in the market is limited to less than 10% today and we are of the view that this will increase exponentially in the years ahead. With this in mind, we have the following solutions developed
The present issues with the conventional system are listed below.
INCONVENIENCE TO WORK WITH
• Sourcing of huge quantity of cement
• Tiles and substrate to be saturated a day before tiling
TIME CONSUMING & LABOUR INTENSIVE
• To lay tiles with sand-cement traditional way is to apply the mixture of sand-cement in a lump on tiles' back so it has to be done with one tile at a time.
LOW DURABILITY
• Low adjustability to tiles as cement has a very low pot life
• Poor bonding strength leads to debonding of tiles hence damaging the aesthetics.
HIGH WASTAGE
• Low pot life leads to material wastage since the mix dries faster than the application
In order to overcome these obstacles, we propose the following solutions - Tile Underlay Systems
BASF has developed tile underlay systems that can be laid on the mother lab to have a surface ready to receive the tile adhesive.
The two products are Master Top 518 and Master Top 528
The tile adhesive systems range of products can be used on all varieties of tiles and natural stones.
EASE OF USAGE
• Minimal substrate preparation required
• Tiles don’t need to be soaked, just unbox and lay.
FASTER COMPLETION OF WORK
• The entire bag of 25kg can be mixed at once
• High open time makes adjustability easy
100% COVERAGE
• Full contact of the adhesive on the tile provides strong adhesion
UNIQUE SOLUTION
• Varied applications such as glass mosaics, large-size to lay tiles on polished substrates, on drywall system, on existing tiles etc.
The above solutions are supported by a wide range of tile grouts.
WALLS
Renew works with a range of wall finishes with very quick turnaround time. The range of coloured UV resistant decorative renders is cement based and can be applied on external and internal surfaces in thickness of 3 MM to 20 MM. These can be spray applied to the desired finish and works as a plastering come painting solution reducing both time and cost. They come in a range of 30 colors.
We use a high range of Decorative finishes and textures products that meet the client taste:
- Vetotouch Serene
Cementitious polymer-modified decorative finish Coat applied at thicknesses from 1 to 3 mm
- Vetotouch Graviatto
Grooved decorative finish coat applied at a thickness from 3 to 4 mm
- Vetotouch Brillante
Exterior decorative textured render applied at a thickness from 3 to 6 mm
- Vetotouch Europa
Cementitious polymer-modified decorative finish coat applied at thicknesses from 1 to 5 mm
- Vetotouch Tyrolean
Exterior decorative textured render applied at a thickness from 3 to 6 mm
- Vetotouch Repara
Dual component cementitious coating and color nuetralizer for cementitious decorative finishes applied at thickness 200 microns
- Vetotouch Textura
Acrylic polymer-modified decorative finish coat applied at thicknesses from 3 to 20 mm
- Vetotouch Marmo
Marble chip decorative exterior and interior finishing system applied at a thickness from 5 to 15 mm
- Vetotouch Monocouche
UV Resistant Pigmented Premixed Plaster applied at thickness uptp 20 mm